Thanks Thanks:  0
Results 1 to 18 of 18

Thread: Any Suppliers of Magnets recommended..?

  1. #1

    Join Date
    Oct 2008
    Location
    Leicestershire
    Posts
    18

    Question Any Suppliers of Magnets recommended..?

    I have been looking around for a while for some decent small magnets available to buy.

    I find fridge magnets and notice board magnets just not up to the job.

    I once found a Micro 35mm cache that i had to pull quite hard to get off a road sign and the enclosed magnet was quite small. :wub:

    I would like to find a similar type, and just wondered if anybody on here has used an outlet they could recommend.

    I did found an online place that sells literally loads of types.. http://e-magnetsuk.com/

    Anybody Used them..?

  2. #2

    Join Date
    Aug 2005
    Posts
    184

    Default

    Quote Originally Posted by seacarrot View Post
    I have been looking around for a while for some decent small magnets available to buy.

    I find fridge magnets and notice board magnets just not up to the job.

    I once found a Micro 35mm cache that i had to pull quite hard to get off a road sign and the enclosed magnet was quite small. :wub:

    I would like to find a similar type, and just wondered if anybody on here has used an outlet they could recommend.

    I did found an online place that sells literally loads of types.. http://e-magnetsuk.com/

    Anybody Used them..?
    what about http://www.geotees.co.uk/product_inf...products_id=67

  3. #3

    Join Date
    Mar 2006
    Posts
    9

    Default

    You could try http://www.dealextreme.com/search.dx...h.magnets#1105 The delivery is a little slow but the prices are good.
    Last edited by Bill D (wwh); 3rd December 2008 at 10:04 PM. Reason: Approved link

  4. #4

    Default

    Quote Originally Posted by seacarrot View Post
    I have been looking around for a while for some decent small magnets available to buy.

    I find fridge magnets and notice board magnets just not up to the job.

    I once found a Micro 35mm cache that i had to pull quite hard to get off a road sign and the enclosed magnet was quite small. :wub:

    I would like to find a similar type, and just wondered if anybody on here has used an outlet they could recommend.

    I did found an online place that sells literally loads of types.. http://e-magnetsuk.com/

    Anybody Used them..?
    I use Supermagnete in Switzerland.. Very quick delivery and a great range of very powerful magnets. Have a look at the DEATH MAGNET...

    http://www.supermagnete.de/eng/index.php?switch_lang=1

    I've used them a few times, and the service and product is always top quality.

    Rampton.

  5. #5

    Join Date
    Jul 2007
    Location
    Church Warsop, Notts
    Posts
    518

    Default

    Neodymium is the keyword!

  6. #6

    Join Date
    Apr 2008
    Location
    Longformacus
    Posts
    316

    Default

    Quote Originally Posted by Happy Humphrey View Post
    Neodymium is the keyword!
    They are the very fellows, also called earth magnets, I believe?
    I've used a few of these on caches I've customized, and these little guys can really stick!
    I bought mine on ebay, and as HH says, the keyword is Neodymium.
    I'm just going outside, and may be some time!

    www.jacobitecaching.co.uk

  7. #7

    Join Date
    Jun 2003
    Location
    Bedfordshire, UK
    Posts
    118

    Default

    Quote Originally Posted by jacobite View Post
    They are the very fellows, also called earth magnets, I believe?
    I've used a few of these on caches I've customized, and these little guys can really stick!
    I bought mine on ebay, and as HH says, the keyword is Neodymium.
    Generally called 'rare earth' magnets and are made of Neodymium Iron Boron but they need some sort of surface treatment like nickle plating. If the plating comes off, then they tend to disintegrate. If you can find them, magnets made of Samarium Cobalt are very nearly as strong and don't require any surface treatment; they will work 'raw'
    If you have an old computer hard drive that's U/S then there are one, sometimes two, very strong magnets in them that are usually bonded onto a steel backplate with holes in. That can make attaching them to a cache box a bit easier. I went into a local computer repair place and asked if they had any scrap HDDs, told them exactly what I wanted them for and they gave me half a dozen.
    John
    Age and treachery will always triumph over youth and ability.

  8. #8

    Join Date
    Oct 2008
    Location
    Anywhere the mood takes us
    Posts
    2,537

    Default

    I have used magnets from these people and have had a few comments on their strenght.
    http://stores.ebay.co.uk/Guys-Magnets

  9. #9

    Join Date
    Oct 2008
    Location
    Leicestershire
    Posts
    18

    Default Cheers...

    Thanks for your help guys, plenty there for me to look though. :socool:

  10. #10

    Join Date
    Apr 2008
    Location
    Huntingdon
    Posts
    9

    Default

    It is Canadian, but here is another supplier.

    http://www.leevalley.com/wood/page.a...&cat=1&p=42363

    Cheers

  11. #11
    sTeamTraen Guest

    Default

    Quote Originally Posted by Pharisee View Post
    Generally called 'rare earth' magnets and are made of Neodymium Iron Boron but they need some sort of surface treatment like nickle plating. If the plating comes off, then they tend to disintegrate.
    The ones I get out of disk drives "suffer" from the nickel plating coming off, but that makes them easier to break into small bits - if you put too much on a cache box you can find that the magnet parts company with the box through the duct tape. The worst thing is that the plating can be quite sharp when you're trying to peel it off.

  12. #12

    Join Date
    Feb 2007
    Location
    Ashbourne, Derbyshire
    Posts
    449

    Default

    Quote Originally Posted by sTeamTraen View Post
    The ones I get out of disk drives "suffer" from the nickel plating coming off, but that makes them easier to break into small bits - if you put too much on a cache box you can find that the magnet parts company with the box through the duct tape. The worst thing is that the plating can be quite sharp when you're trying to peel it off.
    One tip for these types of magnets is to get some Araldite or similiar epoxy glue and coat them in it prior to using them. It helps to remove sharp edges and protects the nickel coating.:cheers:
    "I Cache, therefore I am"

  13. #13

    Join Date
    Jan 1970
    Posts
    0

    Default

    Although you loose a little "pulling power". I find its better to glue, gaffer tape the magnets inside the container. Less chance of loosing the magnets.

  14. #14
    beefy4605 Guest

    Default

    http://www.first4magnets.com/index.asp

    You might find something there that will suit . Never used them so can't offer any advice about service etc

  15. #15

    Join Date
    Jun 2008
    Posts
    261

    Default

    Quote Originally Posted by Rampton Broadmoore View Post
    I use Supermagnete in Switzerland.. Very quick delivery and a great range of very powerful magnets. Have a look at the DEATH MAGNET...

    http://www.supermagnete.de/eng/index.php?switch_lang=1

    I've used them a few times, and the service and product is always top quality.

    Rampton.
    I've just received delivery of several magnets, including a couple of boxed sets for Xmas presents. I can echo what was said about quality and delivery - top notch.

    As for the magnets themselves, well all I can say is "Jesus H Christ"!!!! Talk about powerful! I don't quite know what I'm going to do with the two disks about 1cm dia, each with a lifting force of 12kg (apart from being VERY careful :lol

  16. #16

    Default

    Quote Originally Posted by The Hornet View Post
    I've just received delivery of several magnets, including a couple of boxed sets for Xmas presents. I can echo what was said about quality and delivery - top notch.

    As for the magnets themselves, well all I can say is "Jesus H Christ"!!!! Talk about powerful! I don't quite know what I'm going to do with the two disks about 1cm dia, each with a lifting force of 12kg (apart from being VERY careful :lol
    I bet you are glad you didn't get 2 "death magnets"...

    We destroy ex-mil hard drives at work, and occasionally sod around with the magnets.. The nasty pinch cuts make you respect the power of Neodymium very quickly..


    Rampton.

  17. #17
    Dark_Faerie Guest

    Thumbs up

    Quote Originally Posted by beefy4605 View Post
    http://www.first4magnets.com/index.asp

    You might find something there that will suit . Never used them so can't offer any advice about service etc
    A colleague has used these a few times for non-caching purposes. The service was very fast and he got some freebies. Some of the small ones are really strong, been playing with them at work.

  18. #18

    Join Date
    Apr 2008
    Location
    Carnbroe, Scotland
    Posts
    8

    Default

    [I've used http://e-magnetsuk.com/ a number of times and never had a problem. (They also used to be called www.uk-magnet.com )
    Last edited by Bill D (wwh); 12th December 2008 at 01:13 PM. Reason: Approved links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •